If you’re unable to open a safe yourself, you can call a cheap safe technician to open it for you. These technicians will arrive quickly and assess the safe’s condition. They’ll have the right tools to crack the safe without causing any damage. If the safe is damaged, they can repair it if necessary. If you have insurance, the cost of repairing it may even be covered.
Changing the combination of your safe
To change the combination of your safe, first turn the change key on the interior side of the safe one quarter of a turn counterclockwise. Then, turn the key again a quarter turn clockwise and enter the combination. Repeat this process as necessary to change the combination. Once you have successfully changed the combination, the safe will be able to be opened.
If you are unsure of how to change the combination, your safe manual may contain instructions. In addition, you can search for the manual online for further information. It is also important to keep the serial number of your safe handy.
Drilling a safe to get it open
You can call a safe technician to open a locked safe if you are having trouble opening it yourself. They will arrive quickly and evaluate the situation. They will have the necessary tools and know how to open a safe without damaging the contents. They can also repair a damaged safe if you have insurance.
The first step is to identify what type of safe you have. You should know the make, model, and manufacturer of the safe. This is important, as some safes are built differently.
Using a Keedex taper pin to open a combination safe
If you have trouble opening a combination safe, you can try repairing the lock yourself with a Keedex taper pin. This device is made to help you make small cuts in the safe and cut the spindle flush. This method will not destroy the safe, and it will also save you time.
If you have the right drill bit, you can drill through the lock body and unlock the combination. You’ll need to drill through the exterior steel, which can be thin or up to 1 3/4″. Depending on your safe’s material, you may need to drill through the insulation or hard-plate steel. To drill through these types of layers, you may need specialized drill bits. For most safes, one small hole is sufficient to unlock the lock. You can then fill the hole with a hardened taper pin and the lock will return to its original level of security.
Drilling a combination safe without damaging the safe
Drilling a combination safe requires a special drill rig, extra-long drill bits, and intimate knowledge of the safe and lock. Many modern safes use hard plates and barrier materials, and this can make it difficult to drill them. Another common obstacle to drilling is a glass re-locker, which is located below the spring loaded re-locking bars. This piece of glass can be damaged when a drill bit hits it, locking the safe and preventing access to the contents.
There are several ways to drill a combination safe without damaging it. First, you can drill through the top of the safe without damaging the inner parts. Alternatively, you can drill through the bottom of the safe to reach the bottom. For this, you will need a Keedex taper pin or similar taper.